Automatic linear edge banding machine

HKJ-888EHFMQS
Standard direction: Pre-milling → Gluing1 → Glue on → Double rails end cutting → Rough trimming → Fine trimming→ Four motor Corner-rounding → Scraping → Overhang snipping → Buffing1 → Buffing2
WhatsApp:

+86-18988641173

Detailed Description

  • Video show
    Basic parameters
    Feeding speed 18-25m/min Workpiece width ≥55mm
    Edge band thickness 0.4-3mm working pressure 0.6Mps
    Workpiece thickness 10-55mm Min workpiece size 150(L)×150(W)mm
    Workpiece length ≥120mm Dimensions 10500×900×1700mm
    Sample map
    Product advantages
    • Four corner chamfer tracking

      The tracking system (chamfering) ensures that the edging strip can move flexibly along the curved edge of the workpiece during the conveying process, and provides accurate contour tracking control for the chamfering unit to ensure the quality of the finish.

    • Polishing device

      The polishing device uses a cotton polishing wheel to clean the processed plates, and the end surface of the edge banding is smoother through polishing.

    • Finishing device

      Removal of excess sealing material in the edge band of the processed sheet to ensure the smoothness of the upper and lower parts of the trimmed sheet.

    • Pre-milling device

      Synchronous adjustment of the pre-milling device, which can be adjusted synchronously when the bevel and straight edges are switched, to ensure the same amount of milling under the two functions.

    • Glue device

      The gluing and sealing device uses a special mechanism to make the gluing of the edge-sealing board and the edge-sealing material evenly to ensure a stronger adhesion.

    • Double guide rails quickly all the way

      The head unit moves through precise linear guide rails, adopts automatic profiling and high-frequency electrode rapid cutting mechanisms to ensure the smoothness of the cut surface.

    • Edge scraping device

      The scraping device is used to eliminate the corrugation marks caused by the cutting process of the non-linear motion of the trimming, so that the upper and lower parts of the sapwood are smoother and cleaner.

    • PUR hot melt machine

      The molten glue will fill the glaze adhesive, and the molten glue will be melted in the melt container. The rotating gluing shaft will transport the hot glaze adhesive to the workpiece. The metering device controls the supply amount and adjusts the gap between the gluing shaft and the workpiece. distance.

Copyright© Shunde District, Foshan City, Zhuoyi Machinery Manufacturing Co., Ltd. All rights reserved

Design by:ceall.net.cn