Automatic linear edge banding machine
HKJ-368EFHBDetailed Description
| Feeding speed | 18-25m/min | Workpiece width | ≥55mm |
| Edge band thickness | 0.4-3mm | Working pressure | 0.6Mps |
| Workpiece thickness | 10-55mm | Min workpiece size | 150(L)×150(W)mm |
| Workpiece length | ≥120mm | Dimensions | 8500×900×1700mm |
The polishing device uses a cotton polishing wheel to clean the processed plates, and the end surface of the edge banding is smoother through polishing.
Removal of excess sealing material in the edge band of the processed sheet to ensure the smoothness of the upper and lower parts of the trimmed sheet.
Synchronous adjustment of the pre-milling device, which can be adjusted synchronously when the bevel and straight edges are switched, to ensure the same amount of milling under the two functions.
The gluing and sealing device uses a special mechanism to make the gluing of the edge-sealing board and the edge-sealing material evenly to ensure a stronger adhesion.
The head unit moves through precise linear guide rails, adopts automatic profiling and high-frequency electrode rapid cutting mechanisms to ensure the smoothness of the cut surface.
The scraping device is used to eliminate the corrugation marks caused by the cutting process of the non-linear motion of the trimming, so that the upper and lower parts of the sapwood are smoother and cleaner.
The tracking system (chamfering) ensures that the edging strip can move flexibly along the curved edge of the workpiece during the conveying process, and provides accurate contour tracking control for the chamfering unit to ensure the quality of the finish.
Add：Jichangjiao, Xintang Industrial Zone, Lunjiao Street, Shunde District, Foshan City, Guangdong Province
Mobile：+86-18988641173
Follow Hao Kejie
Copyright© Shunde District, Foshan City, Zhuoyi Machinery Manufacturing Co., Ltd. All rights reserved
Design by：ceall.net.cn
